Item #AGM-35AH-B&C

Battery Charger with a 35ah AGM Sealed Battery
​35ah / 12volt

All AGM batteries have enhancements over flooded lead acid batteries
Fluid retention – un-spillable
High on power density, holding roughly 1.5 x the AH capacity of flooded batteries due to purer lead
Low internal resistance allowing them to be charged quite rapidly
Water conservation – never requires the addition of water
Acid encapsulation in the matting
Availability of UL, DOT, CE, Coast Guard, and Mil-Spec approved
Vibration resistance due to the sandwich construction
AGM store very well and do not sulfate or degrade as deep cycle batteries
AGM batteries can be stored anywhere, sideways, upside down in part that they are “sealed regulated valve”, therefore, no leakage
AGM batteries weigh a third less than the weight of a deep cycle.
Compare our AGM 35ah at 23lbs vs 37lbs lead acid deep cycle.
​ For more information, see the information below.

Trolling motors require a 12v battery to operate. Depending on the pounds of thrust of the motor you choose, you may require a backup battery for longer-range use.
Battery range will vary due to size, weight, and type of kayak in addition to kayak load, wind, and current.

4 hours at 1st / 2nd speed      3 hours at 3rd speed     1.25 hours at 5th speed
Based on a 30 lb Thrust Trolling Motor. Times will be shorter with higher thrust power.